Borison Electronic Limited

BS384V SMT Pick & Place Machine

Key Features

	High Accuracy, High Flexibility for 0201, SOIC, PLCC, µBGA, CSP, as well as QFP
	Up to 6400 cph
	Vision On the Fly Alignment System
	Bottom Vision Alignment System for fine pitch QFP & µBGA
	Built in camera system with Auto Smart Fiducial Mark Learning
	Smart Feeder ID system provide fast set up and easy programming
	Windows 2000 Software and Universal CAD Conversion
	Suitable for small volume production.

Most Affordable, Most Precise, Full-Vision Placement System
The Autotronik BS-384 provides the versatility, precision, and increased capacity needed for today's most challenging front-end surface mount prototyping, product development, and pilot-production applications. Cognex® vision processing and head-mounted vision cameras allow non-contact, "on-the-fly" alignment of a wide range of standard and odd-form SMDs, from the smallest 0201 devices through CSPs, µBGAs, flip-chips and other components up to 16 mm x 14 mm, including 0.5 mm (20 mil) fine-pitch QFPs. A bottom vision station is used for larger components up to 38 mm x 38 mm. Even fully-loaded with a whopping expanded capacity for up to 128 Smart Tape Feeders, the BS-384 can still handle PCBs up to 14.5" x 13.4".

Capacity for Up to Four 32-Port Smart Feeder Bases
Autotronik Smart Feeder Bases can be mounted on all four sides of the BS-384 and each can be loaded with up to 32 Smart 8 mm Tape Feeders. In this arrangement, 14.5" x 13.4" (370 mm x 340 mm) of payload area can be shared by PCBs and waffle trays. Placement area increases to a generous 17.1" x 13.4" (435 mm x 340 mm) with feeder bases mounted on only the front and rear of the system. Click here for feeder arrangements.

Full Catalog of Smart Feeders and Accessories
To go along with the BS-384's large payload capacity, Autotronik offers a full catalog of feeders and accessories to accommodate virtually any type of SMD component packaging, highlighted by our precision tape and stick/tube feeders which utilize our exclusive "Smart Feeder" communication and control technology. The innovative design of our feeder bases and mounting hardware allows almost limitless flexibility in feeder combinations and arrangement schemes, as almost every feeder can be ordered, loaded, programmed and mounted independently. When loading or changing feeders, operators are not forced to remove banks or cassettes of multiple feeders. For additional information on our feeder portfolio, visit our Autotronik Smart Tape Feeder and Smart Stick Feeder Pages.

Optional Dispensing Capability Adds Another Dimension of Flexibility
An additional micro-dispensing head, mounted in tandem with the placement head, can be used to apply solder paste and adhesives. Fully-integrated with the BS-300 Series Pick and Place Control Software, the dispensing system allows application of precise solder paste volumes and patterns, and bypasses the need for costly and time-consuming stencil production when trying to meet your time-to-market window. We offer both our patented ATP Digital Dispensing which can apply solder paste and adhesives at dot sizes down to 0.15 mm diameter and a conventional time-pressure dispense system.

Additional information

Exceptional Placement Area and Feeder Capacity

Head-Mounted Vision Camera for “On-the-Fly” Alignment

Bottom Vision Camera for Fine-Pitch QFPs, µBGAs, CSPs

Optional Dispense Head Applies 6 mil Dot

High-Precision Ball-Screw X-Y Drive Mechanism

Powerful Windows®-based control software

Automatic datum point recognition of PCBs, which is particularly useful when combined with the inline conveyor system

Specifications - BS384V SMT Pick & Place Machine
	BS384V1	BS384V2
No. of Head (Vision on the Fly)	1	2
Maximum placement rate	4000 CPH	6400CPH
Maximum PCB capacity	Up to 450mm x 350mm (using 32 pcs feeders) Up to 370mm x 350mm (using 128 pcs feeders)
Tape Feeder capacity (8mm) - Without conveyor - With conveyor	Up to 128 Up to 64
IC Tray capacity	Up to 2 Waffle trays
Component Size - Minimum - Maximum (w/ Vision-on-the-Fly) - Maximum (w/ Bottom vision)	0.6mm x 0.3mm 16mm x 14mm 38mm x 38mm (with BV38, option)
Resolution	X/Y axis 0.0075mm DC Servo Motor Z axis 0.02mm DC Servo Motor
Placement accuracy	+/- 0.05mm
X-Y Repeatability	+/- 0.015mm
Driving Mechanism	DC-Servo Motor (X, Y, Z, and R Axes) with Closed-Loop Encoding; Precision Ball Screw (X-Y Axes) Standard Linear X-Y Drive and Encoding (optional)
Rotation	0 to 360 degree (0.045 degree / step DC Servo Motor)
Programming	Vision teach-in, Direct input, CAD Download (option)
Component Sense	Vision checking
Main Control & Display	Industrial PC & LCD color monitor
Machine Dimension	1030mm x 940mm x 1250mm (L x W x H)
Weight	450kg
Voltage requirement	100V or 240V, AC
Power	1800W	2100W
Air Pressure	75 psi (5.5 bar)